IGNOU OEEL 001 Practical for CCPD: How to Do the Training, Write Each Daily Row and Send the File

IGNOU OEEL 001 Practical for CCPD: the work in seven moves

The IGNOU OEEL 001 Practical asks a CCPD learner to work real days at a power site, record each task in the Practical Work Book and send the certified file.

1. Ask your study centre if it runs Option I.
2. If not, fix a site and a supervisor for at least 10 days.
3. Agree the tasks before day one.
4. Write one dated row per task, with readings and enclosures.
5. Fill the first page and the ten-item outline.
6. Get Annexure A marked and Annexure A2 signed.
7. Send the file; keep a copy and receipt.

OEEL-001 holds 8 of the 16 CCPD credits and is read as an electrical practical training report. See our CCPD programme overview.

We often meet learners who pass theory papers easily and then stall on the practical. CCPD raises the bar: 50 percent in the practical and in each of its two parts, against 40 for theory.

Many learners tell us they heard of the practical only late in the session. The 2026 workbook makes sending the report a condition for passing OEEL-001.

Choose your route, then count the days back from your due date

Option I of the IGNOU OEEL 001 Practical is three weeks at your study centre or an attached work centre. Where that is not offered, Option II lets you set up your own placement of 10 days or more at a substation, distribution company, electrical industry or training centre. The 2022 guide prints both 10 and 7 to 10 days; the workbook and the IGNOU CCPD programme page say at least 10, so plan for 10. Our IGNOU practical rules for 2026 give the wider picture.

The defaults: a July 2026 learner on 14 November, 16 days to 30 November, none spare.

Batches go up on centre pages learners rarely open; a missed slot waits a cycle. The CCPD coordinator schedules OEEL-001 counselling, mostly at weekends.

In our records, 70 to 80 percent of learners start only in the final month before a date. On OEEL-001 the placement alone takes 10 days of that month.

Some learners wait for a date to move. We cannot say it will; SED takes no practical fee after 30 November 2026.

Week zero: settle the site, the supervisor and the task list

Under Option II the head, manager, in-charge, trainer or counsellor of the site assesses you. Before day one, show them Annexure A (activity report 25, performance 20, understanding 15, explaining 5, attention to detail 5), which also needs your study centre head's signature and stamp, and agree the activities and the A2 dates. Our MLII 105 internship report guide covers a similar host step.

We see work begun under someone the course does not accept, and those days lost. Check your supervisor's title against the roles the CCPD guide names.

Hosts can be wary of distance learners or slow with papers. Ask on day one whether your OEEL-001 supervisor will fill the 70-mark sheet.

Host letters sometimes come late or on plain paper. OEEL-001 asks for no separate completion letter; the seal it needs is on Annexure A2.

Match the manual activities to what your site actually does

The SOET manual has 12 activities, done with an experienced trainer. For the IGNOU OEEL 001 Practical, pick what your site offers:

• Substation: Activity 7 (earth resistance), 8 (transformer up to 1000 kVA), 9 (isolated switchgear).
• Line crew: Activities 1 to 5 (poles, fittings, sagging, joints, service lines).
• Cable section: Activity 6. Metering: Activity 10.
• Wiring contractor or training centre: Activities 11 and 12.

See also IGNOU engineering programmes.

Many learners believe a topic must match the printed list word for word. IGNOU's CCPD page also accepts any distribution topic that meets industry need.

We also see theory pasted from websites unchecked. The OEEL-001 manual already gives each activity's theory; cite its number and write about your task.

Daily activity report format: one dated row per task

The IGNOU OEEL 001 Practical table has four columns (S. No., task undertaken, date, enclosure) and ten printed rows, with no minimum. Build each row from five parts:

1. An action and its object: measured, fitted, tested.
2. The equipment, from the manual's list for that activity.
3. The method in a phrase, with the activity number.
4. Readings or quantities, with units.
5. Your conclusion, and the enclosure that shows it.

Use foolscap paper, not very thin; photos, diagrams and extra pages may be enclosed. Our BLII 230 internship report format shows the same dated-log habit.

Why fuss over rows? The written record loses the most practical marks and is the quickest to mend; Annexure A gives it 25 of 70.

A log written in one go shows: repeated lines, holiday dates, no progress across the days. Write each OEEL-001 row that evening.

Learners often hold three layouts, from the workbook, a counsellor and a senior. For OEEL-001 the 2026 workbook's layout is the one marked; follow it strictly.

Earth resistance test procedure, as Activity 7 sets it out

1. Check the earth tester (P1, P2, C1, C2) and use leads of negligible resistance.
2. Join C1 and P1 and connect them to the electrode under test.
3. Drive two spikes in line, 25 m and 50 m out (Figure 7.1), each no deeper than 1/20 of their spacing: 1.25 m for 25 m.
4. P2 to the nearer spike, C2 to the farther; turn the handle and read.
5. Move the potential spike a few metres each side and read twice more; equal readings mean no overlap.
6. If they differ, take the current spike farther out and repeat.
7. Compare with 7.5; if high, note the 7.6 remedies (tighter joints, water, bigger or parallel electrodes, deeper pit).

The standard earth resistance values in 7.5 run from 0.5 ohm (major power station) to 20 to 30 ohm (tower); an L.T. pole is 5.0 and an H.T. pole 10.0. Major sub-stations show 0 ohm, apparently a misprint, so ask your supervisor.

In test-based practicals we often see a reading judged against the wrong table. In an OEEL-001 earth row, name the 7.5 line you used.

Learners tell us nobody showed them how to write up practical work. Activity 7 is a model: objectives, equipment, theory, procedure, conclusion.

Worked example: an earth test row in the IGNOU OEEL 001 Practical report

Some learners enter figures they never measured. Each OEEL-001 reading must come off the tester in your hands that day.

Megger test for house wiring and the other Activity 11 checks

1. Switch off, remove the main fuses and disconnect all loads.
2. Continuity: one circuit at a time, fuse output to neutral strip; a lit lamp or deflection means continuity.
3. Polarity: single-pole switches in the phase line; phase on the right-hand pin of each 3-pin socket.
4. Check the 500 V megger: leads shorted, pointer to zero; leads open, pointer at infinity.
5. Insulation: line to the main switch output, earth to the casing. Near infinity is good, short of it poor, near zero a short to earth.
6. Earth continuity: metal conduits, boxes and socket earths no more than 1 ohm to main earth.
7. Record test, reading, observation and result (11.6), then restore the supply.

Weak practical records often skip the observation table or the precautions. OEEL-001 Activity 11 supplies both, starting with switching off the supply.

Hindi-medium learners find English write-ups hard, and the reverse lacks terms. No OEEL-001 document sets the report language, so ask your centre.

Assemble the file: annexures, first page and the ten-item outline

The 2026 CCPD practical work book asks you to cut out Annexures A, A2 and B and put them in front. Order:

1. Annexure A: the supervisor's 70-mark sheet, signed and stamped.
2. Annexure A2: your details, the organisation, from and to dates, an own-work statement, and the supervisor's signature, designation and seal. A1 is optional.
3. Annexure B: the IGNOU expert's 30-mark sheet.
4. Heading lines: enrolment number, date, codes, course title, centre names and codes, and your contact details.
5. Outline: your details, kind of work, topic, site address, duration and role (trainee, intern or employee).
6. The daily table, then enclosures numbered as rows cite them.

Wrong enrolment numbers or centre codes on page one are common. OEEL-001 asks for both centre codes; copy them from your admission details.

Does order matter? A missing part usually costs marks. In the IGNOU OEEL 001 Practical file, nothing goes ahead of Annexure A.

Online files arrive split or with wrong first pages. If your centre directs online submission, as the CCPD guide allows, send one complete file.

Slips we see in work reports, with the fix for each

Twelve checks before the IGNOU OEEL 001 Practical file leaves you

Posting to SED or handing in at your centre

By post, address the IGNOU OEEL 001 Practical file to:

CCPD Practical Course - OEEL-001
Student Evaluation Division (SED), IGNOU
Maidan Garhi, New Delhi-110068

Or hand it in at your study centre or regional centre by the due date, with an acknowledgement. The 2026 OEE-001 and OEE-002 assignment booklet sends the workbook to SED, while the 2022 guide mentions the centre or online as directed; ask your programme in-charge.

Learners often wonder whether a file goes to the centre, the Regional Centre or Maidan Garhi. OEEL-001 prints two routes: SED by post, or your centre.

A friend at another centre may follow other rules. The workbook sends you to your own programme in-charge.

Many learners ask how many copies to send. The OEEL-001 workbook prints no count, only that you keep a photocopy.

Fee on Samarth, the expert's 30 marks and a viva you can prepare for

The July 2026 Common Prospectus charges Rs 300 up to 4 credits and Rs 500 above, so the 8-credit IGNOU OEEL 001 Practical is in the Rs 500 slab, paid with the term-end examination form and not refundable. SED's December 2026 notice sets 30 November 2026 for the practical fee on Samarth; the 2022 guide's Rs 200 is older. See our IGNOU fee structure for all courses and the December 2026 date sheet by course code for your theory papers.

Level B (30 marks) is the IGNOU expert's evaluation of your report, a viva, or both. Rehearse these self-test questions:

• Why does a power station need very low earth resistance? (7)
• How is high earth resistance reduced? (7)
• What does a megger pointer at infinity or zero mean? (11)
• Why is muffing needed on a pole? (1)
• What does unequal conductor tension cause? (3)

Rs 300 or Rs 500? Learners often confuse them; OEEL-001's 8 credits put it in the higher slab.

A viva treated as a formality catches people out; a neat file you cannot explain scores poorly. Talk each OEEL-001 row through aloud.

Is there a viva at all? Annexure B leaves that to the OEEL-001 expert; ask your study centre.

Have your own work report read before you post it

For a second reading of your IGNOU OEEL 001 Practical draft, send it on WhatsApp to +91 93546 37830. We check rows, readings, order and first-page details against the 2026 workbook and return comments; you make the changes. The record check is quoted on WhatsApp; see our services and charges page. Marks stay with the supervisor and IGNOU's expert.

Questions working technicians ask about OEEL-001

Putting your IGNOU OEEL 001 Practical together

Settle the route, brief the supervisor, date a row each evening and send in time. Theory guess papers are in the reference material for this course on our publication site, and our IGNOU result and pending updates page tracks releases.

Three causes recur: late rules that vary by centre, practicals needing time learners lack, and files treated as formatting, not skill. OEEL-001 wants a task against every date.

Learners who do well start early, check with their own centre, settle the site first, date each entry, collect signatures as they go and can explain every page.

Practical marks often reach the grade card after theory, holding up results while a job waits. The workbook makes the OEEL-001 report compulsory for the CCPD certificate.

Documents behind this CCPD how-to

• OEEL-001 Practical Work Book, SOET, 2026
• OEEL-001 Practical in Power Distribution manual, SOET
• CCPD Programme Guide, November 2022
• CCPD assignment booklet, 2026
• IGNOU Common Prospectus, July 2026
• IGNOU announcements, SED practical fee notice

Method: the six documents listed above were read in November 2026. Drafting was AI-assisted, each rule was checked against those sources, and BK Sahni publishes this under his editorial responsibility.

ignouproject.com is not affiliated with, authorised by or endorsed by IGNOU. We check a learner's own work report; the learner remains its author.